Quail Hollow #2 Plaster Sand
Quail Hollow #2 Plaster Sand is produced at our Felton quarry and is designed for small hand applied masonry and stucco projects as well as large pumped stucco applications. It can also be used in pre-cast concrete products, including tiles and garden art, and recreational applications including play areas and volleyball courts.
#2 Plaster Sand is produced by mining, screening, washing, and re-screening two different sands—a coarse fraction and a fine fraction. These two sands are then blended together using a four bin hopper and common belt, at an 80:20 ratio, to create the final product.
The coarse fraction of Quail Hollow #2 Plaster Sand is currently produced in limited quantities resulting in relatively low finished product availability.
A typical gradation is listed below for evaluation. As with all natural materials, some variation will occur.
For additional information, please contact the Aggregate Division Sales Office at 831.768.2380
Sieve Size | ASTM Spec. No. C-897 | Quail Hollow #2 Plaster Sand |
---|---|---|
3⁄8″ | 100 | 100 |
No. 4 (4.75 mm) | 100 | 100 |
No. 8 (2.36 mm) | 90-100 | 100 |
No. 16 (1.18 mm) | 60-90 | 87.7 |
No. 30 (600 um) | 35-70 | 55.1 |
No. 50 (300 um) | 10-30 | 28.9 |
No. 100 (150 um) | 0-5 | 2.1 |
No. 200 | 0 | 0.6 |